Hello all! This week's tutorial is another fun way to spice up an ordinary tee -- peek-a-boo cutwork. It's similar to the technique we showed you earlier (in the Peek-a-boo lacework tutorial) but this version is more of a true reverse applique. Let's get started!
First off, if you need a good pattern for an AG tee, go ahead and download this one -- it's absolutely free!
Next, get your supplies out. All you need is two harmonizing colors of knit fabric, a marking tool (I used a chalk pencil), and your normal sewing equipment.
Time to prepare your pieces! If you're building a tee from scratch, cut everything out, then lay the front piece out flat. (You can also just embellish a ready-made tee, but be sure you can lay the front out flat as well -- it makes things a lot easier!)
Draw on a heart outline, then draw in some slashes. Mine were about 1/4" - 3/8" apart. This isn't rocket science so don't sweat it too much! I re-drew the lines on the image in photoshop, but in real life you want the lines just dark enough so you can see them.
Then, using sharp scissors (or if you're careful, a rotary cutter), cut along the slash lines.
Next, lay the slashed tee front over a piece of the peek-a-boo fabric. Be sure both layers are flat, and pin carefully to keep them from wiggling around.
Stitch along the chalked heart outline, then down the middle of each slash to secure.
Flip the tee front to the wrong side, and trim away the excess peek-a-boo fabric.
And that's it! Go ahead and finish putting the tee together normally -- and then trot out your finished handiwork.
Yes - I want the Liberty Jane Co. Newsletter!
© 2022 aleksandrajones